Kingspan Fumetica - S Flap Ventilator

Double flap smoke and heat exhaust ventilator with large extraction capacity

The Kingspan Fumetica-S is an EN 12101-2 certified double flap ventilation system, with flaps at an inclination of 7°, suitable for the extraction of smoke and heat, daily ventilation and use as a skylight. Its large dimensions, a geometric surface area up to 7.5 m2, makes the Fumetica-S ideally suited to the effective extraction of significant quantities of (polluted) hot air and smoke. A sophisticated production method enables this flap ventilator, which has fall prevention feature in closed position, to be manufactured in any desired dimensions and for every flat build-in application. It is particularly suitable for distribution centres, storage facilities, production environments and industries where it is important that the product is free of silicones or other similar substances.

  • Base is available in uninsulated or insulated aluminium 30 mm
  • Significant flexibility in dimensions and flange type
  • The aluminium used in the production of the Kingspan Fumetica-S consists of 80% recycled aluminium. Recycling aluminium produces 60 to 80% less CO2 emissions than the production of primary aluminium.
  • Sea water and corrosion resistant EN AW 5754 (AlMg3) aluminium sheet material

Kingspan MONO/DUO Therma

Cold bridge-free, thermally insulated smoke ventilator

The innovative twin flap system employed by Kingspan’s Duo Therma product make it ideally suited for buildings which have stringent requirements for air sealing and thermal and/or acoustic insulation, as well as for structures with high moisture levels. A thermally insulated alternative is also offered, which will minimize the formation of condensation, and the product can also be supplied uninsulated, translucent, and with a single flap instead of two.

  • Constructed from tempered aluminium
  • Sea water and corrosion resistant AIMg3
  • Can supply powder coated in any RAL colour
  • Can be designed to incorporate 44dB noise-damping flaps, cold bridge-free base and flaps or with glass infill panels

Kingspan Incendia

Cold bridge-free, thermally insulated smoke ventilator

The Kingspan Incendia Flap Ventilator is an EN 12101-2 certified mono flap system and is suitable for the extraction of smoke and heat, daily ventilation and for daylight ingress. Its large dimensions, a geometric surface of up to 5.1 m2, makes the Incendia ideally suited to the effective extraction of significant quantities of (polluted) hot air and smoke. In case of fire, the Incendia opens within 60 seconds to an opening angle of 140°, and the mono flap is fully locked in its final position, thus ensuring the maximum extraction of smoke and heat. For daily ventilation the opening angle can be timecontrolled if a motor control is opted for.The Kingspan Incendia is available in different base types and uninsulated or insulated aluminium or transparent flap. Depending on the size, the ventilator is equipped with one or two pneumatic or electric control(s).

  • Choice of uninsulated base or 30 mm insulated base
  • The Incendia is produced using recycled aluminium which produces 60 to 80% less CO2 emissions than the production of primary aluminium
  • Significant flexibility in dimensions and flange type
  • Seal covered all round with PE tape, which prevents freezing in position and guarantees high air density
  • Base and flanges are sea water and corrosion resistant EN AW 5754 (AlMg3) aluminium sheet material
  • Easy installation

    • Available in a wide variety of sizes ranging from 800mm x 1000mm to 1700mm x 3000mm (Throat Size of Incendia; Width x Lenght)